Door Hinge Finish Codes — Q&A Guide
Direct answer: door hinge finish codes name the color and surface of the hardware. US codes such as US32D, US19 and US10B describe only the look; BHMA numbers from ANSI/BHMA A156.18 add the base metal, so US19 flat black is 622 on brass and 631 on steel. See the full article, satin bronze hinges and can you powder coat a self-closing hinge?
Reading the Codes
Q: What do door hinge finish codes like US32D and US19 mean?
They name the color and surface of the hinge. US32D is satin stainless steel and US19 is flat black. The BHMA numbers in ANSI/BHMA A156.18 §5.2 add the base metal: US32D is 630 on 300 series stainless, and US19 is 622 on brass or 631 on steel. For Waterson K51M: the stock finishes are US32D-630 satin brushed stainless steel and US19-631 flat black powder coating.
Q: Why does one US code have several BHMA numbers?
The US codes described appearance only. A156.18 §4.3.1 gives a separate number for each base material, so satin chrome US26D is 626 on brass and 652 on steel.
Q: Is US10 the same as US10B?
No. US10 is satin bronze, clear coated (BHMA 612 on bronze). US10B is a dark, oil-rubbed bronze (BHMA 613 on bronze, 640 on plated steel). For Waterson: the dark bronze is 695, and US10B is its older name.
Q: What does the E after a finish code mean, as in 613E?
A156.18 §5.1 says the E suffix means the finish is compared to the match plate for appearance only, regardless of the base material or finish process.
Bronze and Black
Q: Is US10B the same as 613 or 695?
Both, in different senses. A156.18 §5.2 lists 613, dark oxidized satin bronze oil rubbed, as the finish nearest to US10B. 695 is dark bronze painted on any base, and §4.2.1 pairs it with the 613 match plate, written “613 (695)”. For Waterson: a request for US10B and a quote for 695 are the same product, “Dark Bronze 695”.
Q: Why can’t a stainless steel hinge have a true US10B finish?
True 613 is bronze that is oxidized and oil-rubbed. A156.18 §4.2 calls it Category B, an unstable finish that changes with use and cannot match across alloys or makers. Stainless cannot be oxidized that way, so the look comes from a coating. For Waterson K51M: stainless steel hinges carry dark bronze as the 695 finish.
Q: Will a 695 hinge match a 613 lever on the same door?
They are meant to look alike, but they age differently. A156.18 §4.2 classes 613 as an unstable finish that changes with use, while 695 is a painted finish held to the BHMA match plate. If the spec says 613 for everything, get the 695 hinges approved by submittal.
Q: Is US19 black the same on every product?
The look is, the base metal is not. 622 is flat black coated on brass or bronze, 631 on steel, and 693 is black painted on any base (A156.18 §5.2). For Waterson K51M: US19-631 is a factory flat black powder coating and a stock finish.
Q: Will 622 black lock trim match 631 black hinges?
Yes, by design. A156.18 §5.3 gives 622 as the primary appearance equivalent of 631. Both are the US19 look.
Q: What finish is US4?
Satin brass. It is 606 on solid brass and 731, a vacuum-applied satin brass appearance, on 300 series stainless (A156.18 §5.2). For Waterson: satin brass is listed as US4 / 731.
Ordering and Specifying
Q: Can I get a hinge finish that is not in the catalog?
Usually through the factory, not the job site. For Waterson K51M: custom PVD finishes, including gold, bronze and custom colors, are available with a minimum order quantity.
Q: Which finishes does the Waterson gate-hinge range list?
For Waterson gate hinges: 630, 631, 695, 731, 612 and White.
Q: Does a finish code tell me how long the hinge lasts outdoors?
Only as a test minimum. A156.18 §6.1 sets salt spray hours (ASTM B117) for hinge finishes, and §6.14 applies them to A156.17 self-closing hinges; in BHMA’s 2018 proposed revision, painted material must pass 48 hours and stainless steel 200 hours. §3.1 says these tests do not predict life in actual use. For Waterson K51M: 316 stainless is used for more corrosive environments.
Q: Can I paint a self-closing hinge on site to change its color?
Ask for a factory finish instead. On a fire door, NFPA 80 (2022) §5.1.5 sends field modifications beyond permitted job-site preparations to the labeling laboratory, and labels must stay legible.
Q: How should I write the finish in a hardware schedule?
Use the BHMA number with the US code beside it, such as “630 (US32D)”, and list the number per base metal. For Waterson K51M: write 630 for satin stainless or 631 for flat black.
Related: self-closing fire door hinges, 304 vs 316 stainless steel hinges, hardware specification guide.