Waterson Door Hinge Knowledge Hub

What Do Door Hinge Finish Codes Like US32D, US19 and US10B Mean?

Published November 10, 2026 • 7 min read • For specifiers, hardware installers, contractors and homeowners

Door hinge finish codes name the color and surface of the hardware. The older US codes (US32D, US19, US10B) describe only the look, while the three-digit BHMA numbers from ANSI/BHMA A156.18 also say which metal is underneath, so one US code can map to several BHMA numbers: US19 flat black is 622 on brass and 631 on steel, for example. When a spec and a quote use different codes, check that both point to the same look on the hinge’s actual base metal.

Quick Facts

Why One Finish Has Two Names

The US codes come from old US Department of Commerce commercial standards for builders’ hardware. They described appearance only: US26D meant satin chrome whether the part was brass or steel. BHMA replaced them with three-digit numbers that encode finish and base material together. ANSI/BHMA A156.18 §4.3.1 gives a separate number for each base material, and the §5.2 tables keep the old code only in a column headed “nearest former US equivalent”.

That is why a hardware schedule often writes both, such as “626 (US26D)” or “US32D / 630”. Our hardware specification guide shows where the finish line sits in a schedule.

A contractor following up on a quote this autumn asked us a short question: would flat black or satin stainless be acceptable? The project spec named one finish, the rest of the hardware on the door used another, and nobody on site was sure which code governed the hinge. Reading each code as “look plus base metal” settles it quickly.

The Finish Codes You Will Meet on Hinges

US codeLookBHMA number by base metal (A156.18 §5.2)
US32DSatin stainless steel630 (300 series stainless)
US32Bright stainless steel629 (300 series stainless)
US19Flat black622 (brass, bronze), 631 (steel), 671 (aluminum); 693 black painted, any base
US26DSatin chrome626 (brass, bronze), 652 (steel)
US10Satin bronze612 (bronze), 740 (vacuum applied, 300 series stainless)
US10BDark oil-rubbed bronze613 (bronze), 640 (plated steel); 695 dark bronze painted, any base
US4Satin brass606 (brass), 731 (vacuum applied, 300 series stainless)

Two codes that look alike are not the same color. US10 is satin bronze, clear coated; US10B is dark oxidized, oil-rubbed bronze. Ask for physical samples of both before you choose.

Waterson’s Finishes and Their Codes

Waterson’s K51M is investment-cast stainless steel throughout, with 304 typical and 316 for more corrosive environments. Its stock finishes are US32D-630 satin brushed stainless steel and US19-631 flat black powder coating. Custom PVD finishes, including gold, bronze and custom colors, are available with a minimum order quantity.

Waterson codeAlso calledFinish
US32D630Satin stainless steel
US19631Flat black
695US10BDark satin bronze, “Dark Bronze 695”
US4731Satin brass

The gate-hinge range lists finishes 630, 631, 695, 731, 612 and White; see gate hinges. For Waterson, a request for US10B and a quote for 695 are the same product: US10B is the older name of the 695 dark bronze.

One detail a careful reviewer will spot: A156.18 §5.2 lists 631 as flat black coated on a steel base. On a stainless hinge, read 631 as the name of the US19 flat black look. A156.18 §5.3 gives 622 as the primary appearance equivalent of 631, so 622 black lock trim and 631 black hinges belong on the same door.

Why a US10B Spec Becomes 695 on a Stainless Hinge

True US10B, BHMA 613, is dark oxidized satin bronze, oil rubbed, on a bronze base. ANSI/BHMA A156.18 §4.2 puts it in Category B: an unstable, “living” finish that cannot match from one alloy or one maker to the next. §3.1.2 even exempts 613 and its plated equivalents from the finish tests.

Stainless steel cannot be oxidized and oil-rubbed like bronze, so the look comes from a coating. BHMA 695 is “dark bronze painted” on any base material, and §4.2.1 pairs it with the 613 match plate, written “613 (695)”. In plain terms, 695 is the coated finish that matches the US10B look on a metal that cannot carry a true oil-rubbed finish.

One buyer this year wrote US10B on the request and the quote came back in 695. The codes differ; the dark bronze is the same. What differs is how each finish is meant to age. §4.2 classes 613 as an unstable finish that changes with use, so a 613 lever can wear to bronze highlights; 695 is a painted finish in the categories held to the BHMA match plates. If the spec says 613 for everything, ask the architect to accept 695 for the hinges by submittal.

How to Match a Finish Across a Door

  1. Name the look first, then the metal. Write the finish as BHMA number plus US code, and expect different numbers on parts made of different metals.
  2. Use the E suffix when you mean “looks like”. A156.18 §5.1 says a code with suffix E, such as 613E, is compared to the match plate for appearance only, regardless of base metal or process. A submittal note can read: “Hinges: stainless steel, finish 695, offered as the appearance match for 613 per ANSI/BHMA A156.18 §4.2.1.”
  3. Get physical samples. §4.3.3.1 judges finishes as matching when they look the same placed two feet apart and viewed from three feet away. A photo on a screen is not a match test.
  4. Change the color at the factory, not on site. Field painting and powder coating a self-closing hinge are covered in can you powder coat a self-closing hinge?
  5. On a fire door, keep the labels legible. NFPA 80 (2022) §5.1.5 sends field modifications that are not permitted job-site preparations to the labeling laboratory.

Does the Finish Code Tell You How Long It Lasts?

Partly. ANSI/BHMA A156.18 §6.1 sets salt spray hours under ASTM B117 for hinge finishes, and §6.14 applies the same table to A156.17 self-closing hinges. In BHMA’s 2018 proposed revision, which led to the 2020 edition, painted material must withstand 48 hours and stainless steel 200 hours. §3.1 adds that the tests are a quality-control method and “do not predict the performance life of the finishes in actual use”.

For salt air, the base metal matters more than the color. Waterson uses 316 stainless for more corrosive environments; see 304 vs 316 stainless steel hinges. The K51M is ANSI/BHMA A156.17 Grade 1, tested to 1,000,000+ cycles; our page on ANSI/BHMA A156.17 explains the grades.

A design team asked whether a hinge set could match a named architectural color that no catalog lists. For Waterson that is a custom PVD finish, which comes with a minimum order quantity.

Choosing a Finish

Frequently Asked Questions

What does US32D mean on a door hinge?

US32D is satin stainless steel, the brushed stainless look. Its BHMA number is 630, which ANSI/BHMA A156.18 §5.2 defines as satin stainless steel on a 300 series stainless base.

Is US10B the same as 613?

613 is the BHMA number nearest to US10B: dark oxidized satin bronze, oil rubbed, on a bronze base. On other metals the US10B look has other numbers, such as 640 on plated steel or 695, dark bronze painted on any base. Waterson calls its dark bronze 695 and accepts US10B as the same finish.

What is the difference between US10 and US10B?

Color. US10 (BHMA 612) is satin bronze, clear coated; US10B (BHMA 613) is dark oxidized satin bronze, oil rubbed. Compare physical samples before ordering.

Is US19 the same as 631 or 622?

All three are flat black. ANSI/BHMA A156.18 §5.2 lists 622 on brass or bronze and 631 on steel, both nearest to US19, and §5.3 gives 622 as the appearance equivalent of 631, so black lock trim and black hinges match.

Why does my quote show 695 when the spec says US10B?

Because the hinge is not bronze. True US10B (613) is oxidized, oil-rubbed bronze. On stainless steel the dark bronze look is a coating, and A156.18 §4.2.1 pairs 695 with the 613 match plate. Waterson’s 695 is the same product a US10B request asks for.

What does the E mean in 613E?

ANSI/BHMA A156.18 §5.1 says a finish code with suffix E is compared to the match plate for appearance only, regardless of the base material or finish process.

Which finishes do Waterson self-closing hinges come in?

The K51M stock finishes are US32D-630 satin brushed stainless steel and US19-631 flat black powder coating. Waterson’s finish table also lists 695 dark bronze (US10B) and US4-731 satin brass, and custom PVD finishes are available with a minimum order quantity.

Need a self-closing hinge in a finish that matches the rest of the door?

See Waterson self-closing hinges
Sources & Standards Referenced